CYP CH-507TXWPBD Bedieningshandleiding - Pagina 9
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} CYP CH-507TXWPBD. CYP CH-507TXWPBD 16 pagina's. Hdmi over single cat5e/cat6
Ook voor CYP CH-507TXWPBD: Bedieningshandleiding (16 pagina's)
Pagina afdrukken
6
HDMI IN: This slot is to connect with HDMI source equipment such
as DVD/Blu-ray player with HDMI source signal.
7
Power LED: This LED will illuminate when the device is connected to
a power supply.
8
LINK LED: This LED will illuminate when the both CAT5e/6/7 input
and output signal is connected.
6.2 Receiver
1
IR 1 EXTENDER: This slot is to connect with the IR receiver cable
included in the package for IR signal receiving.
2
DC 24V: Connect the power adaptor included in the package
and then connect to AC power to activate the device.
3
IR 2 BLASTER: This slot is to connect with the IR blaster cable
included in the package for IR signal transmitting.
4
RS-232 OUT: This slot is to connect with D-Sub 9-pin cable from
device equipment for receiving RS-232 commands.
5
LAN: Connect to an active network for LAN serving and Telnet/
Web GUI control.
When the transmitter or any compatible LAN equipped receivers
are connected to a network, this allows the network access
1
2
IR 1
EXTENDER
IR 2
BLASTER
RS-232
OUT
3
4
DC 24V
LAN
HDMI OUT
5
6
LINK
POWER
7
8
4