CYP CH-1106TX & RX Bedieningshandleiding - Pagina 9
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} CYP CH-1106TX & RX. CYP CH-1106TX & RX 16 pagina's. Hdmi over cat5e/6 transmitter and receiver set
with ir source control
Ook voor CYP CH-1106TX & RX: Bedieningshandleiding (16 pagina's), Bedieningshandleiding (16 pagina's)
Pagina afdrukken
7. Operation Controls and Functions
7.1 Transmitter Front and Rear Panels
IR
HDMI INPUT
Transmitter
①
②
① IR Transmitter: This slot is where you connect the IR blaster cable. Place the
IR eye in front of the source equipment(s) in order to send an IR signal, the
IR blaster has a frequency range from 30KHz to 50KHz.
② HDMI INPUT: This slot is where you connect the HDMI or DVI output port of
your source equipment such as DVD/Blu-ray players or set-top-boxes
with an HDMI cable or receiver unit, you may also connect this device to
another unit from the same family or some other type of splitter to further
extend an HDMI signal.
③ POWER 5V: This slot is where you plug the 5V DC power supply into the unit
and connect the adaptor to an AC outlet.
④ DDC OUTPUT: Connect to the DDC Input of the receiver with a CAT6
cable.
⑤ Video OUTPUT: Connect to the Video Input of the receiver with a CAT6
cable.
POWER 5V
③
DDC
④
4
VIDEO
CAT6 OUTPUT
⑤