Ashdown GEEZER BUTLER PEDAL OF DOOM Gebruikershandleiding - Pagina 5
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Ashdown GEEZER BUTLER PEDAL OF DOOM. Ashdown GEEZER BUTLER PEDAL OF DOOM 8 pagina's.
Pagina afdrukkenPEDAL OF DOOM
USER GUIDE
OUTPUT
This is used to set the overall output of the pedal, set to off and no sound will be heard.
BASS / LO MID / HI MID, E.Q. CHANNEL 1 (Left hand side)
The 3-band independent E.Q. can be used to dial in a tone for E.Q. Channel 1.
TREBLE
This controls the treble and is shared with E.Q. channel 1 & 2.
BASS / LO MID / HI MID, E.Q. CHANNEL 2 (Right hand side)
The 3-band independent E.Q .can be used to dial in a tone for EQ Channel 2.
DOOM
This dials in the amount of drive you want. From a small amount of edge to your tone to a world
ending distorted overdrive, this has you covered. CAUTION! Handle the DOOM level with care!
DOOM VOL
Sets the output level of your drive, when set to off and Doom is engaged (Blue LED light will be on
in the VU meter) no sound will be heard. Use this to match the volume of your amp or add a little
gain for a boost.
EQ 1/2 SWITCH
Use this foot switch to change between E.Q. setting 1 and E.Q. setting 2.
DOOM SWITCH
This foot switch engages the DOOM!!!!!!
GROUND LIFT SWITCH
The ground lift switch eliminates unwanted hum and buzz if you are plugging into noisy
mains power.