closomat Palma Vita Installatie- en gebruikershandleiding - Pagina 10
Blader online of download pdf Installatie- en gebruikershandleiding voor {categorie_naam} closomat Palma Vita. closomat Palma Vita 12 pagina's.
Pagina afdrukken
Palma integrated fold-down support
arms installation
Armrest
Left Hand
Stainless
Pivot Bearing
M20 Bolt
Important
Bolt must not
rotate when the
armrest is
moved.
Nylon
Washer
Pivot Block
End Cap
How to drill holes in the cover if
armrests are fitted
PALMA FITTED WITH FOLD DOWN SUPPORT ARMS, MUST USE ALL FOUR FIXINGS ALONG WITH THE REAR WALL FIXING
(SEE PAGE 6 FOR DETAILS). FLOOR AND WALL FIXINGS INTEGRITY ARE ESSENTIAL FOR UNIT STABILITY.
Pivot Block
50mm Dia. Belville
Washer
Important
Ensure Belville Washer is
assembled correctly with the dome towards the bolt head
Measure 367mm from
rear of unit to centre of
arm fixing point
IMPORTANT NOTE:
Pivot Block
Washer
Support
Inserted on to
arm seal
Pivot Block
10
HOLE CUTTING
POSITION FOR
OUTER COVER
IS MEASURED
TO CENTRE OF
ARM BRACKET
ON FRAME
Hole
diameter
76mm
minimum
78mm
maximum
Measure from
upper side of porcelain
pan to centre of arm
fixing point approx.
207mm – 210mm