CYP PU-103 Bedieningshandleiding - Pagina 4

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} CYP PU-103. CYP PU-103 16 pagina's. V1.3 hdmi - cat6 repeater
Ook voor CYP PU-103: Bedieningshandleiding (7 pagina's), Bedieningshandleiding (9 pagina's)

Pagina afdrukken

1. Introduction

This is the transmitter (Tx) unit of HDMI to CAT6 Solution that can extend

HDMI digital signal through CAT-6 cables. This is compatible to HDMI v1.3

specifications, a cutting edge technology which defines the support to

transfer Deep Color (12 bits/color) video and new lossless compressed

(Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) Digital audio,

with a bandwidth up to 225MHz. The installation of HDMI to CAT6 is easy

and quick, simply place receiver side next to your HDTV source such as a

DVD player, then place the transmitter side next to your display or CAT 6 to

CAT6 repeater unit and get all necessary cables connected and enjoy.

2. Main Features

Compliant with HDMI 1.3, HDCP 1.1 and DVI1.1 standards.

Supports digital video formats in Deep Color Mode at up to 36 bits

(12bits/color) and new lossless compressed (Dolby TrueHD, Dolby Digital

Plus and DTS-HD Master Audio) Digital audio .

Supports CAT-6 cables for data/DDC transmission.

Supports equalize and recover incoming TMDS data before re-transmitting

them with optimal quality regardless of the incoming signal quality.

Supports high definition resolution, the input up to 1080p/12bits and output

resolution follows input. The distance table please refers to section 5.

Support CEC function.

Easy to install and simple to operate.

3. Package Contents

HDMI to CAT6 Transmitter.

5V DC power supply adaptor.

Operation Manual.

4. Operation Controls and Functions

4.1. Front Panel

1 HDMI input: Connect the HDMI input port to the HDMI or DVI output of your

source equipment such as DVD player or set-top-box.

2 Power: Plug the 5VDC power supply into the unit and connect the

adaptor to AC wall outlet.

POWER

HDMI INPUT

DC 5V