CYP PU-USBX Bedieningshandleiding - Pagina 9

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} CYP PU-USBX. CYP PU-USBX 16 pagina's. Usb over ethernet extender
Ook voor CYP PU-USBX: Bedieningshandleiding (13 pagina's)

Pagina afdrukken

6.2 Rear Panel

USB 1~4: Use to connect to USB devices such as flash drives, external

HDDs, digital cameras, printers, and etc.

The USB over Ethernet Extender is a multi-function USB HUB which

allows you to:

A. LAN Mode: Allows PC/Laptops to access USB devices over an

existing Intranet network. The LAN Mode can be used in a home or

office environment that has its own configured network infrastructure,

as the device will allow users connected to the LAN (Local Area

Network) to access up to four USB devices.

B. Extender Mode: Extend the USB operating distance over a single

RJ45 terminated CAT5e/6 cable up to 100 meters this allows the use of

USB devices in remote locations in an installation.

C. HUB Mode: Use it as a regular 4 port USB Hub. Where no signal

extension is needed, the device can be used as a 4 port USB Hub and

can be directly connected to a PC/Laptop.

For the LAN mode or Extender Mode to function, the software

application and driver (provided on the supplied CD-ROM) are

required to be installed on any connected PCs/Laptops for them to

identify and hook up with the unit in the same network using TCP/IP

protocol.

In all 3 modes, USB 2.0 (data rates up to 480Mbps) and USB 1.1

protocols (data rates up to 12 Mbps) are both supported.

Role of USB devices in a setup with this unit:

- Host Devices (PC / Laptop): Can Control this unit and any USB devices

connected to it.