CYP CDP-13DPI Bedieningshandleiding - Pagina 7

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} CYP CDP-13DPI. CYP CDP-13DPI 12 pagina's. 1by 3 displayport extender splitter

Pagina afdrukken

7. Operation Controls and Functions

7.1 Front & Right Panel

DP OUT3

DP OUT 1~3: Connect these slots with the output displays Display port

①

input port in order to send a signal.

Note: It is suggested to use the same type/model of display in order

to get the optimal image quality. When the input source ' s timing is

matched with the output display ' s timing, the device will first

extend the image according to the numbers of the output

connected. If the input sources timing does not match with output

display ' s timing the device will then split the signal to match the

number of the connected display to show an identical image.

(Detail information please refer to section 8. Timing table for

monitors).

7.2 Right Panel

On/off switch: Push this switch to turn the device on or off. The green LED

①

will turn on when the device is switched on.

DC 3.3V: This slot is where you plug the 3.3V DC power supply into the

②

unit and connect the adaptor to an AC outlet.

DP IN: This slot is where you connect the input source equipment such as

③

a PC or any output device that has a DisplayPort.

DP OUT2

DC 3.3V

POWER

OFF

DP OUT1

DP IN