Ashford COUNTRY SPINNER 2 Gebruiksaanwijzing - Pagina 10

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Ashford COUNTRY SPINNER 2. Ashford COUNTRY SPINNER 2 12 pagina's.

Apply a drop of oil to

the flyer shaft and slide

the bobbin onto it. Then

position the flyer into

the front and back flyer

bearings. At the same

time locate the stretchy

drive belt on to the

middle groove in the

bobbin whorl & wrap

it around the middle

groove in the wheel.

CHECK: There should be

2-3mm (1/8") clearance

between the flyer and

flyer bearings. If not

loosen the bolts securing

the top rails, adjust the

clearance and retighten.

2-3mm

Attach the leather brake

to the front top rail with a

15mm (5/8") round head

screw.

Thread the tension knob

through the leather brake

band and into the front

top rail.

Insert the 2 wooden lazy

kate rods into the holes in

the sides of the Spinner.

If you want to ply your

yarn, spare bobbins are

available from your local

Ashford Dealer.

HINT: The Spinner is

bobbin lead and will

require very little tension

to draw the yarn onto the

bobbin. Only apply a

minimum tension.