Ashford KIWI 2 SPINNING WHEEL Gebruiksaanwijzing - Pagina 9
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Ashford KIWI 2 SPINNING WHEEL. Ashford KIWI 2 SPINNING WHEEL 13 pagina's.
Ook voor Ashford KIWI 2 SPINNING WHEEL: Handmatig (13 pagina's)
Pagina afdrukken
Align the wheel and hole
in the crank shaft with
the groove in the
hub.
Carefully tap the
hub pin through the
hub and crank.
Lay the wheel on it's
back. (protect your table
with a towel or piece of
cardboard)
Remove the front conrod
from the crank.
Insert the front conrod
joint into the right
treadle board.
Hold the conrod joint with
one hand on either side of the
treadle board.
With both hands turn the
conrod joint a ¼ turn towards
you.
Slide it up into the small
slot and turn it back a ¼ turn
until it clicks into place.
9
Note that the rear conrod
attaches to the left treadle
board and the front conrod
attaches to the right treadle
board.