Cloud CX242 Installatie- en gebruikershandleiding - Pagina 11
Blader online of download pdf Installatie- en gebruikershandleiding voor {categorie_naam} Cloud CX242. Cloud CX242 12 pagina's. Zone mixer
Pagina afdrukkenCX242: I
NSTALLATION AND OPERATION MANUAL
With no external connection to pin 3, an internal 15k resistor connected to the +15V
power will 'pull up' the source select control voltage and the 'off' position will be selected.
The output impedance of the control voltage source should be low enough to overcome
the influence of this resistor. If you require to fix the music signal to the Line 1 input, wire
a 20k resistor between pins 1 & 3 on the remote control connector.
If the control voltages are not isolated, there is a small risk of creating a 'ground loop' by
linking the CX242 ground with the ground of the equipment providing the control voltages;
we suggest that all pieces of equipment be positioned in close proximity.
11
Technical Specifications
Stereo Line Inputs
Frequency Response
Distortion
Nominal input level
Input impedance
Input gain
Headroom
Noise
Equalisation
Microphone Inputs
Frequency Response
Distortion
Gain range
Input impedance
Common mode rejection
Headroom
Noise
Equalisation
Zone outputs
Nominal output level
Minimum load impedance
Maximum output level
15/07/02 V4
20Hz-20kHz ±0.5dB
<0.05% 20Hz-20kHz
0dBu/775mV
100kΩ
±12dB
>20dB
-90dB A weighted (0dB gain)
HF ±10dB 10kHz
LF ±10dB 50Hz
100Hz-20kHz ±0.5dB
<0.03% 20Hz-20kHz
0dB-60dB
>2kΩ (balanced)
>70dB 1kHz
>20dB
-122dB EIN 22Hz-22kHz (150Ω)
HF ±10dB 5kHz
LF ±10dB 100Hz
0dBu balanced, -6dBu unbalanced
600Ω
+26dBu balanced, +20dBu unbalanced
10