1010music Toolbox Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 1010music Toolbox. 1010music Toolbox 16 pagina's.
Ook voor 1010music Toolbox: Snelstarthandleiding (2 pagina's)

Pagina afdrukken

Start Playback of the Sequencers and Function Generators

Toolbox comes with two presets that demonstrate the use of the sequencers and function generators. Let's play one

of them to demonstrate the use of the module. Select one of the two supplied presets: STABS or BBQ. Note that

these presets have gate sequencers 1, 2 and 3 configured.

To control playback of all of the sequencers and function generators:

Press the HOME button to display the Main screen if needed.

Touch

in the lower left corner of the screen to toggle playback on and off. The

Play

when it is selected. The blue bar at the bottom of the

You can also use CV Mod In 4 to control playback. Each high signal received on CV Mod In 4 will

toggle playback on and off.

Toolbox will now generate a sequence of gate signals out through the Gate Sequencer output jacks 1, 2, 3

and 4 which can trigger notes on another module. Listen to the output of the receiving module to hear the

sequences. (Note that the presets that come with Toolbox only have Gate Sequencers 1, 2 and 3 configured, so no

signal will go out Gate Sequencer output jack 4 when using these presets as they were originally configured.)

Toolbox allows you to switch presets in real time to switch all patterns at once. If you switch presets during playback,

the change will take effect at the beginning of the next bar. This change is quantized to measure to give you smooth

transitions. You can also use modulation to alter pattern length, step size, and transposition to get maximum use out

of a single pattern.

Mute Mode

Toolbox offers the ability to quickly mute individual function or sequencer component outputs. This allows you to

turn different components on and off during the course of playback or to isolate a single component while creating

the sequence.

To use Mute Mode to temporarily disable playback of toolbox components:

Press HOME to return to the Main screen if needed.

Press HOME to toggle Mute Mode on and off. In Mute Mode, the colors of the screen components

change to green and red.

Touch boxes on the screen to mute them. Touch them again to re-activate them. Green elements are active

and red elements are muted.

Use the Sequencers and Function Generators

Now that we have tested the module setup we are ready to start creating our own

functions and sequencers. Toolbox has 4 gate sequencers, 4 note sequencers, and 4

function generators. The function generators include 3 low frequency oscillators

(LFOs) and 1 control voltage sequence (SEQ) generator. On the Main screen, the

second column from the left contains a series of squares that show a miniature

representation of each of the gate sequencers. The next column to the right contains

a series of rectangles that represent the four note sequencers. The rightmost column

contains buttons for each of the 3 LFO function generators and the control voltage

sequencer. You can touch each of the elements in these columns to access the

screens used to configure them. You can also use the Control Knobs to change the

currently selected element. The current selection is highlighted in pink. You can then

press the INFO button to configure the selected element. Each of these elements

maps to a Control Voltage output in the grid below the touchscreen.

Use the Gate Sequencer

The Gate Sequencer is a useful way to create a repeating pattern of ON and OFF control voltage signals. These

signals are then typically used to trigger notes or effects in other modules. For toolbox, the ON signal output will be

+5V, and the OFF signal will be 0V. Due to the nature of CV signals, the Gate Sequencer output is monophonic.

P. 8

11/23/17 10:32 AM

button indicates when playback is active.

Play

Digital Heart – Analog Soul

Toolbox User Manual

button is pink

Play

Figure 7: Ma in Screen

w ith No te Sequencer 1

Selected