Cypress CM-398H Bedieningshandleiding - Pagina 10
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Cypress CM-398H. Cypress CM-398H 16 pagina's. Cv/sv to hdmi converter with audio input
Ook voor Cypress CM-398H: Bedieningshandleiding (12 pagina's)
Pagina afdrukken
8. OSD
1. Press the top panel's button once to switch in between CV/SV. If input
source is disconnected the OSD will show "No Signal".
2. Press the top panel's button for 3 second to bring up OSD manual.
3. When the device is under PC mode the OSD will display input format and
output timing, source detection, PC monitor's EDID and fi rmware version
as to above picture.
4. When the device is under HD mode the OSD will display input format and
output timing, frame rate conversion selection, video system and fi rmware
version as show in below picture.
← INput format / OUTput Resolution
← PC Monitor Information
← Firmware Information
← INput format / OUTput Resolution
← Firmware Information
6 6