Cypress CP-255I Bedieningshandleiding - Pagina 8

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Cypress CP-255I. Cypress CP-255I 16 pagina's. Cv/sv/pc/hd/hdmi 1080p scaler box

Pagina afdrukken

4.4. Remote Control

1. POWER:

Press the button once to power on the CP-255I.

Press again to enter standby mode.

2. INPUT:

Press the button repeatedly to toggle through

various input sources.

3. HD Input:

Press the button to directly select component

input.

4. PC Input:

Press the button to directly select PC input.

5. HDMI/DVI Input:

Press the button to directly select DVI (or HDMI)

input.

6. Output Resolution:

Press any one of the button to directly select

output resolution. For other output resolutions that

are not covered by these buttons please enter

OSD Menu to select them.

7. MENU:

Press the button to bring up OSD main menu page.

8. Exit:

Press the button to exit from a sub menu or main

menu.

9. Up/Down/Left/Right:

Press the Up/Down button to move the highlight

bar to your desired parameter during the

OSD operation. Press the Left/Right button to

increase/decrease the setting value of a selected

parameter.

10. OK (Enter):

Press the button to conﬁrm your selection.

11. Reset:

Press the button to reset the unit's ﬁrmware setting

to the factory default value.

12. Auto Adjust:

Press the button to optimize the position of the

picture (picture centering) on the screen.