Ashly TM-360 Bedieningshandleiding - Pagina 4
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Ashly TM-360. Ashly TM-360 16 pagina's. Public address amplifier
Ook voor Ashly TM-360: Bedieningshandleiding (16 pagina's), Beknopte handleiding (1 pagina's), Beknopte handleiding (1 pagina's), Beknopte handleiding (1 pagina's), Beknopte handleiding (1 pagina's)
Operating Manual - TM-360 Public Address Amplifier
Front Panel Features
1) Input 2 Jack
This is a 3.5mm tip-ring-sleeve (TRS) jack on the front panel that drives input 2. This jack is very
useful for connecting MP3 players, and overrides all input 2 connections on the back panel.
2) Input Signal LEDs (3)
These green LEDs flash when signal is present and the input level control is turned up. They only
indicate signal present, not clipping. Also, if the TM-360 is in sleep mode from audio inactivity, at
least one input signal LED must show signal activity for the amplifier to automatically wake up.
3) Input Level Controls (3)
These adjust the input signal levels sent to the master level control. Note that input signal LEDs
indicate audio taken after the input level controls.
4) Bass and Treble Controls
These control the bass and treble of the main amplifier output.
5) Master Volume Control
This controls the main amplifier output level. There is a separate rear panel level control for zone 2
output.
6) Power LED
This LED is blue when the amplifier is powered on and active, and is red when in sleep or standby
mode.
7) Power Switch
This switch turns the power on or off.
4