Cypress CY3280-20x66 Universal CapSense Snelstarthandleiding
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cypress CY3280-20x66 Universal CapSense. Cypress CY3280-20x66 Universal CapSense 2 pagina's. Universal capsense controller kit
Pagina afdrukken
CY3280-20X66 UNIVERSAL CAPSENSE CONTROLLER KIT
1
Remove CY3280-20x66 Universal
CapSense Controller Board from package.
Connect the CY3280-SLM board (to be
purchased separately) to the P2 connector.
3
Touch the CapSense button or slider. The
respective LEDs lights up.
QUICK START GUIDE
2
Ensure that shunt is placed between 5 V
and VCC of jumper J1. Plug in the USB
cable to the CY3280-20x66 Universal
CapSense Controller Board.
4
Insert the kit CD into the CD drive of your
PC. Install the kit contents, PSoC Designer,
PSoC Programmer, and Bridge Control
Panel. After the kit contents and software
are installed, PSoC Designer can be used
to customize existing example projects or
create new ones.