Ashly Protea DSP360 Bedieningshandleiding - Pagina 10
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Ashly Protea DSP360. Ashly Protea DSP360 16 pagina's. Loudspeaker system processors
Pagina afdrukkenOperating Manual - PROTEA™ DSP480 and DSP360 System Processors
4 .7 Other Functions
The Protea DSP480 and DSP360 have a full complement of non-audio functions within a single keystroke to navigate
around the product quickly. Recall, Save, Copy, Mute, and a Utilities menu complete the user friendly interface Protea products
are known for.
4 .7a Recall
There are 30 stored presets which can be recalled on the DSP processor. Note: A preset recall will overwrite the work-
ing settings, so make sure the current configuration is saved before continuing or it will be lost. Remember, an unsaved working
preset shows (modified) on the preset name screen. Press Esc to see the preset name screen. The unit always loads the working
preset on power-up, so as to preserve any changes should the power be inadvertently turned off prior to saving.
Ashly has included ten preset templates as starting points for common DSP480 or DSP360 configurations, and these
preset templates repeat as they scroll through the 30 presets. To recall a new preset, press the recall button once, select the desired
preset number, and press recall again. At this point the LCD display prompts the user to mute the outputs or not, and selecting
Yes or No will load the new preset and mute all outputs if so desired. A new preset may have dramatically different settings
capable of damaging sound system components, so be careful not to recall the wrong preset while the system is on. To be safe,
always select "Yes" to mute all outputs.
4 .7b Save
Once the unit has been adjusted to suit the application, the changes can be permanently saved to memory*. To save a
new configuration or save changes to an existing preset template, begin the process by pressing the Save button once. The LCD
display prompts for the new (or same) preset number, and after selecting the desired number press Save again. At this point the
name of the preset can be changed by selecting any one of the 20 text characters and scrolling through the list of 89 available
ASCII characters for each. Pressing the Save button again permanently stores the working preset to the new preset location.
*Note: performing a Factory Reset will erase all user presets and replace them with the ten original Ashly preset
templates. User defined presets can be stored off-line as files using Protea NE Software.
4 .7c Copy
The Copy function is used to quickly transfer all settings from a currently selected input or output to another input or
output channel. An example of how this might be used is with stage monitors. Suppose there are eight monitor mixes on stage,
and they all use the same type of floor wedge. The first monitor could be set up with Gain, EQ, and Limiting, then those settings
could be quickly copied to the remaining seven monitors, providing a consistent starting point for each mix. To copy, first select
the input/output to copy from, then press the Copy button, then press the input/output to copy to, pressing the Copy button a
second time to complete the action.
4 .7d Mute
The Protea DSP480 and DSP360 allow the user to mute both inputs and/or outputs. When muted, an input or output's
red Mute LED is lit. When an input or output is selected, pressing the Mute button will toggle its mute function. To quickly
mute all outputs, escape out to the top level preset display, then press the Mute button, pressing it a second time to confirm.
Additionally, when recalling a new preset number to the unit, the LCD display prompts the user to mute all outputs, as a new
preset can introduce dramatic changes to the system configuration.
10