Cypress Semiconductor CY7C1231H Specificatieblad - Pagina 11

Blader online of download pdf Specificatieblad voor {categorie_naam} Cypress Semiconductor CY7C1231H. Cypress Semiconductor CY7C1231H 13 pagina's. Cypress 2-mbit (128k x 18) flow-through sram with nobl architecture specification sheet

Pagina afdrukken

Ordering Information

"Not all of the speed, package and temperature ranges are available. Please contact your local sales representative or
Speed
(MHz)
Ordering Code
133
CY7C1231H-133AXC 51-85050 100-pin Thin Quad Flat Pack (14 x 20 x 1.4 mm) Lead-Free
CY7C1231H-133AXI

Package Diagram

R 0.08 MIN.
0.20 MAX.
0.25
GAUGE PLANE
0°-7°
0.60±0.15
1.00 REF.
NoBL and No Bus Latency are trademarks of Cypress Semiconductor Corporation. ZBT is a trademark of Integrated Device
Technology, Inc. All product and company names mentioned in this document are the trademarks of their respective holders.
Document #: 001-00207 Rev. *B
© Cypress Semiconductor Corporation, 2006. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use
of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be
used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its
products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress
products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
visit
www.cypress.com
for actual products offered".
Package
Diagram
51-85050 100-pin Thin Quad Flat Pack (14 x 20 x 1.4 mm) Lead-Free
100-pin TQFP (14 x 20 x 1.4 mm) (51-85050)
16.00±0.20
14.00±0.10
100
81
1
80
30
51
31
50
0° MIN.
STAND-OFF
0.05 MIN.
0.15 MAX.
R 0.08 MIN.
0.20 MAX.
0.20 MIN.
A
DETAIL
Package Type
0.30±0.08
0.65
TYP.
SEATING PLANE
NOTE:
1. JEDEC STD REF MS-026
2. BODY LENGTH DIMENSION DOES NOT INCLUDE MOLD PROTRUSION/END FLASH
MOLD PROTRUSION/END FLASH SHALL NOT EXCEED 0.0098 in (0.25 mm) PER SIDE
BODY LENGTH DIMENSIONS ARE MAX PLASTIC BODY SIZE INCLUDING MOLD MISMATCH
3. DIMENSIONS IN MILLIMETERS
CY7C1231H
Operating
Range
Commercial
Industrial
1.40±0.05
12°±1°
SEE DETAIL
(8X)
0.20 MAX.
1.60 MAX.
51-85050-*B
Page 11 of 12
A
[+] Feedback