Cypress Semiconductor MiniProg3 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cypress Semiconductor MiniProg3. Cypress Semiconductor MiniProg3 20 pagina's.

Pagina afdrukken

Introduction

PSoC

MiniProg3 is an all-in-one programmer for PSoC 1, PSoC 3, PSoC 4, and PSoC 5LP

architectures, a debug tool for PSoC 3, PSoC 4, and PSoC 5LP architectures, and an USB-I

Bridge for debugging I

Designed as a low-cost aid for developers to use in building their own systems around Cypress 8-bit

and 32-bit PSoC devices, the MiniProg3 is included in the

as a standalone kit, CY8CKIT-002. These kits are available through the

through our distributors.

Figure 1-1. MiniProg3

1.1

CY8CKIT-002 Contents

The CY8CKIT-002 MiniProg3 kit includes:

MiniProg3 programmer/debugger

■

10-pin ribbon cable

■

USB cable

■

Software CD

■

Quick start guide

■

The CY8CKIT-002 CD installs critical information, such as the kit documentation, which includes the

user guide and release notes, in the following project directory:

[Install path]\Cypress\CY8CKIT-002 MiniProg3

1.2

Programming

The MiniProg3 programmer/debugger provides the flexibility to work with different programming and

debugging interfaces, such as JTAG, SWD, ISSP, and I

PSoC devices. When programming, MiniProg3 enables communication with target devices using I/O

voltage levels from 1.5 V to 5.5 V. In addition, MiniProg3 can supply power to a simple target board

at one of four voltage levels: 1.8 V, 2.5 V, 3.3 V, or 5 V.

CY8CKIT-002 MiniProg3 User Guide, Doc. # 001-59350 Rev. *E

C serial connections and communicating with PSoC devices.

CY8CKIT-001

development kit and sold

Cypress Online Store

C. MiniProg3 supports all 8-bit and 32-bit