Cyrus Straight Line Gebruiksaanwijzing - Pagina 9
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Cyrus Straight Line. Cyrus Straight Line 13 pagina's.
Pagina afdrukken
ADDITIONAL INFORMATION
KNOW YOUR CYRUS STRAIGHT LINE
Power
•
When powered up from the mains switch on the rear
panel, the Cyrus Straight Line will enter Standby
mode.
•
When switched to Standby, the power amplifier
section of the Cyrus Straight Line is shut down to
ensure minimal power consumption and reduced heat
generation.
Volume and Balance
•
The volume control system of your Cyrus Straight
Line is a precision engineered potentiometer which
has been chosen for its musical transparency. The
inter-channel tracking of this unit is maintained to a
very high standard.
•
In order to preserve the purity of the signal path, your
amplifier is not equipped with a balance control
Bi-amping / Tri-amping
•
The buffered pre-amplifier output of the Cyrus
Straight Line may be used in conjunction with added
power amplifier blocks to upgrade your loudspeaker
system through Bi-amping or Tri-amping. The Cyrus
Power is recommended for this application.
English
USING YOUR CYRUS STRAIGHT LINE
In all audio systems, the audible volume from the speakers
will change in level when switching from one music
source to another due to the differing output sensitivities
of each source component. This is particularly the case
with CD players which frequently have output levels very
much greater than other programme sources.
For safety and to preserve the longevity of your
equipment:
1.
Ensure the volume control is always set to minimum
before selecting any source.
2.
Select the input required.
3.
Adjust the level control to give a comfortable
listening level leaving a margin of headroom for the
amplifier to work in.
4.
NEVER turn up the volume 'as loud as it will go'. If
audible distortion is observed, the level is too high
and may cause damage to your amplifier and
loudspeakers.
Cyrus Straight Line
8