Cyrus SE series Gebruiksaanwijzing - Pagina 3

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Cyrus SE series. Cyrus SE series 6 pagina's.

Pagina afdrukken

Cyrus SE series CD players

Program Memory Storage

The CD8 has two program modes – Program and Exclude. Program sets the

CD8 to play the sequence of tracks you like, Exclude sets the CD8 to skip the

tracks you don't like. To set the CD8 to Program or Exclude a selection of

tracks, follow this sequence-

Load a disc.

Press the MEMORY STORE key on the remote control once to set

Program mode (the display will read 'Enter Tracks') or twice to set

Exclude mode (the display will read 'Skip Tracks').

Enter the sequence of tracks to be stored (or skipped) with the remote

control numeric keypad. A maximum of 30 tracks may be stored in the

program memory. If an error is made in the programming sequence,

pressing the STOP/EJECT key will cancel the last entry.

When all the tracks have been stored, press the MEMORY key again

(the display will now read 'Program Ready'.

Press play to begin playing the tracks in the programmed sequence.

NOTE:

1. 'MEMORY FULL' indication will show on the display when the program

stored exceeds 30 tracks or a stored program time of 100 minutes or

greater.

2. When engaging STOP while a program is stored, an extra press is

needed to clear the memory. Thus:

•

Press STOP/EJECT once to stop the disc.

•

Press STOP/EJECT a second time to clear the memory.

•

Press STOP/EJECT a third time to eject the CD.

•

One continuous press will accomplish all operations.

FRONT PANEL DISPLAY

Key to the Front Panel Display drawing:

1. Track Display (Two Digit)

Track number, disc reading and error display.

2. Mode Indicator

Indicates the current operation mode (play, pause etc.)

3. Time Display

When the disc is stopped this indicates the total time.

When the disc is playing, either elapsed time for the current track or time

remaining to the end of the disc

5. Repeat Indicator

This symbol indicates that repeat is set.

6. Memory Display

Indicates when a program is stored in the memory.

7. Text display area

For status messages.

(Refer to Fig.3)

will be shown.

User Instructions