Cyrusher KT-LCD3 Computerhandleiding - Pagina 6
Blader online of download pdf Computerhandleiding voor {categorie_naam} Cyrusher KT-LCD3. Cyrusher KT-LCD3 11 pagina's.
Ook voor Cyrusher KT-LCD3: Gebruikershandleiding (19 pagina's)
Pagina afdrukken
REGULAR OPERATIONS SETTINGS
9) Set Wheel Rim Diameter
Range is 6-28 inch and 700C.
XF800 default rim setting is 26 in.
After setting Max Speed, press
wheel rim diameter setting. When you see the
rim data is flashing, press
the data of rim diameter.
10) Speed Unit Preference Setting
After setting wheel rim diameter, press
you see the MPH/ Km/H and Mil/Km are flashing, press
you prefer.
Please note above setting from 8 to 10, need to press
seconds to turn off after each setting to save changed data. If no movement on setting
button over 1 minute, the bike computer will go to the default working screen and all your
changed setting data will not be saved.
P Level Setting Code Operation：
After Speed Unit Preference Setting, press
P Level Code setting model.
P 1: Motor Feature Setting
Range：1-255. XF800 default code is 87;
When you see P1 is flashing, press
change data required.
This technical setting is only for engineer setting, do not modify
or change the setting.
P2: Wheelset Speed Pulse Setting
Rage:0-16, XF800 default code is 1;
Press
switch to P2, press
change data required.
This technical setting is only for engineer setting, do not modify
or change the setting.
CYRUSHER.COM
to switch
or
to change
to switch speed unit changes setting. When
+
or
to
or
to
Page 5
ASSIST
ODO
DST
CRUISE
VOL
or
to change Speed Unit
one time or hold on for 2
together for 2 seconds to enter the
ASSIST
ODO
DST
VOL
CRUISE
ASSIST
ODO
DST
VOL
CRUISE
T M
T T M
AV S
M X S
MPH
MOTOR
F
W
C
Km / H
F
Mil
C
Km
T M
T T M
AV S
M X S
MPH
MOTOR
F
W
C
Km / H
F
Mil
C
Km
T M
T T M
AV S
M X S
MPH
MOTOR
F
W
C
Km / H
F
Mil
C
Km