ASIX AX88772 Installatiehandleiding - Pagina 3

Blader online of download pdf Installatiehandleiding voor {categorie_naam} ASIX AX88772. ASIX AX88772 19 pagina's. Usb 2.0 10/100m fast ethernet adapter
Ook voor ASIX AX88772: Gebruikershandleiding (14 pagina's), Gebruikershandleiding (4 pagina's)

Pagina afdrukken
ASIX AX88772 Installatiehandleiding
v1.0.0.8
Francis
v1.0.0.7
Francis
v1.0.0.6
Francis
v1.0.0.5
Francis
v1.0.0.4
Allan Chou
v1.0.0.3
Allan Chou
v1.0.0.2
Allan Chou
v1.0.0.1
Allan Chou
v1.0.0.0
Allan Chou
Copyright (C) 2005-2009 Reserved by ASIX Electronics Corporation
WinCE 5.0 Driver Installation Guide
2009/01/06
1. Fix SROM size error when program EEPROM.
2008/11/14
1. Change interrupt in interval from 1s to 125ms.
2 .Register VID/PID 0B95_7720 and 0B95_772A instead
of only VID 0B95 in USBInstallDriver routine.
3. Modify EEPROM write function, add a write delay
time parameter, and add
OID_SET_EEPROM_DELAY_TIME to let SROM
tool to set this parameter. Default value is 5ms.
4. Turn on AX88772A backpressure function when
enable flow control.
2007/04/02
1. Support AX88772A chip. (Add wakeup frame and
VLAN)
2. Modify to fix EHCI resume issue.
3. Change "Prefix" parameter from "NDS" to "ASX" in
"project.reg" file
1. Add the "OID_ACCESS_EEPROM" OID to support
2006/10/02
SROM Programming Tool.
2006/05/18
1. Modify to fix the CETK test failure issue when the
"NetworkAddress" parameter was set.
2006/01/23
1. Modify to fix RX hang-up issue under AU1200
platform for a long-time media stream test.
2005/11/10
1. Modify to fix TX hang-up issue under MainStone II
platform.
2005/09/14
1. Modify to support external MII PHY.
2005/07/14
1. New release for WinCE 5.0.
AX88772A/AX88772
3