BlueParrott C300-XT Gebruikershandleiding - Pagina 12
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} BlueParrott C300-XT. BlueParrott C300-XT 20 pagina's.
Ook voor BlueParrott C300-XT: Aan de slag (13 pagina's), Aan de slag (13 pagina's)
Pagina afdrukken
GETTING STARTED
Manual Pairing
If the C300-XT has already been paired with another device and you are not going to
use NFC Pairing, you will need to put it into Pairing Mode manually:
Placing Headset in Pairing Mode
By Voice:
Activate headset voice recognition by pressing the Parrott Button or by pressing and
holding the Volume Up button . Then, after the prompt, say "pair mode . " The headset
will enter Pairing Mode and be visible for pairing to devices for 120 seconds .
Using Buttons:
With the headset powered off, press the MFB until the LED rapidly flashes blue and
you hear the audio prompt "power on . " Keep holding the MFB for approximately 10
seconds until you hear "Pair Mode" . The LED will rapidly flash blue and red when in
Pairing Mode, and will be visible for pairing to devices for 120 seconds .
Pairing to a Cell Phone
1 . Make sure that other Bluetooth devices are turned off or out of range .
2 . Place the headset into Pairing Mode .
3 . Put your cell phone in Bluetooth Search/Scan Mode per the manufacturer's
instructions .
4 . Select "BP C300-XT" to pair . (Passcode is "0000" if needed .)
5 . Accept the phone book access request to enable caller ID in the headset .
6 . When connected, the headset will give you the voice prompt, "Your headset is
connected . "
BlueParrott C300-XT User Manual
(continued)
PAGE 12