Ega Master 62982 Gebruiksaanwijzing - Pagina 2

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Ega Master 62982. Ega Master 62982 10 pagina's. Analogic reversible mini torque wrench

Pagina afdrukken

ENGLISH

1. This torque wrench is a precision instrument intended to be used only to tighten screws, bolts

and nuts to a desired torque.

2. Do not use it as a "nut breaker", pry bar, hammer, or in lieu of a regular ratchet wrench.

3. Do not apply torque in excess of the maximun capacity of the wrench. Apply load on the grip

only, and do not use any handle extension bars (a piece of pipe put over the grip).

4. Head Holder torque wrench should be used with heads. If using special heads, please set

torque as formula on page 5.

5. Make sure that you adjust the wrench to the exact torque units your specifications call for, or

you will severely under-torque or over-torque, causing severe damage to the equipment you are

working on.

6. Do not disassemble te wrench for any reason. Higly stressed internal components may cause

severe injury when released in an unintended manner.

7. The wrench should be re-calibrated periodically. The calibration of the wrench should be

checked at least once a year, after any abnormal handling or overloading, or after 5,000 cycles

("clics").

READ BEFOE YOU USE