BlueRange BR9009000 Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} BlueRange BR9009000. BlueRange BR9009000 8 pagina's. Solar powered auto-darkening welding helmet
Pagina afdrukken1) Introduction
Auto-darkening welding helmets are designed to protect the eyes and face from sparks, splatter, and harmful
radiation under normal welding conditions. The auto-darkening filter (ADF) automatically changes from a
light to dark state when an arc is struck and returns to the light state when the welding arc disappears.
The Auto-darkening welding helmet comes ready to use. The only thing you need to do before welding is to
adjust the position of the headband and select the correct shade number for your application.
!
WARNING
PLEASE READ THIS MANUAL CAREFULLY BEFORE USING
2) Safety Warning
• Recommended usage period of 3 years from date of first use. The duration of the helmet depends on
various factors such as usage, cleaning, storage and maintenance. Frequent inspections and replacement
of damaged components is recommended.
• Materials that may come into contact with the wearer's skin could cause allergic reactions to susceptible
individuals
• Eye-protectors against high speed particles worn over standard ophthalmic spectacles may transmit
impacts, thus creating a hazard to the wearer.
• If protection against high speed particles at extremes of temperature is required, then the selected eye-
protector should be marked with the letter T immediately after the impact letter, i.e. FT, BT or AT. If the
impact letter is not followed by the letter T then the eye protector shall only be used against high speed
particles at room temperature.
1. This Auto-Darkening filter welding helmet is not suitable for laser welding and Oxyacetylene welding.
2. Never place this Helmet and Auto-Darkening filter on a hot surface.
3. Never open or tamper with the Auto-Darkening filter.
4. Before operating, please make sure that the function-setting switch is set to the suitable location
("WELDING" / "GRINDING"). This Auto-darkening filter welding helmet will not protect against severe
impact hazards.
5. This helmet will not protect against explosive devices or corrosive liquids.
6. Do not make any modifications to either the filter or helmet, unless specified in this manual.
7. Should this helmet not darken upon striking an arc, stop welding immediately and contact us.
8. Do not immerse the filter in water.
9. Do not use any solvents on filters' screen or helmet components.
10. Use only at temperatures: -5°C ~ + 55°C (23°F ~ 131°F )
11. Storing temperature: - 20°C ~ +70°C (-4 °F ~ 158°F )
12. Protect filter from contact with liquid and dirt.
13. Clean filters' surfaces regularly; do not use strong cleaning solutions. Always keep sensors and solar
cells clean using a clean, lint-free tissue/cloth.
14. Regularly replace the cracked/scratched/pitted front cover lens.
3) Hazard Definitions
Please familiarise yourself with the hazard notices found in this manual. Severe personal injury could occur
if the user fails to follow the aforementioned warnings and/or fails to follow the operating instructions.
Page 2