MODEL D1706
UNIT DIMENSIONS
US
Height
32-1/4"–35-1/2"
Width
24"
Depth
23-7/16"*
Depth w/door open
46-1/2"*
Weight
104 lb
24"
610 mm
FRONT PANELS
The front panels on Model D1706 (except
the stainless steel model) can be covered
or replaced with wood panels. See page 6
for instructions on how to change the front
panels.
CUTOUT DIMENSIONS
US
Height
32-1/4"–35-1/2"
Width
24"
Depth
23-7/16"
*This depth allows a 1" (25 mm) space for
the high-loop drain hose.
NOTE: Maintain a 1/8" (3 mm) minimum
clearance between unit and cabinet.
2
Metric
819–902 mm
610 mm
596 mm
1181 mm
48 kg
2"
50mm
6-1/4" to 8-1/4"
159-210 mm
Metric
819–902 mm
610 mm
The electrical and water supplies should
596 mm
enter through the area indicated by the
shaded area. Preferably, they should come
through the right side of the machine. The
access hole must be round and smooth
and no bigger than 2" in diameter.
Specifications are subject to change without notice. See installation instructions for additional details.
ASKO D
TECHNICAL DATA
Electricity
Water pressure
Heating element
Max loading
46-1/2"*
EASYINSTALL SYSTEM
Every ASKO dishwasher comes with the
unique EasyInstall System that speeds the
installation and reduces problems. This
system has these components which are
approved by regulatory authorities (cUL):
• Over 5' of Pex hose that replaces the
24"
610 mm
• Over 6' of drainhose with an adaptable
• A 6' long electrical cord with standard,
ISHWASHER
120V, 60Hz, 15 amp
18-176 psi
1400 watt
1600 watt
water-inlet copper tubing. It has a 3/8"-
compression fitting that mates with the
shut-off valve.
drain connection.The high loop is built
into this hose on the back of the unit. If
this loop is removed to lengthen the
hose, another high-loop must be built
into the installation somewhere along
the line (typically where the hose passes
through the cabinet).
3-pronged, 110V plug. This eliminates
the need to wire anything under the unit.
Pagina afdrukken