Blueshape BV140HD Gebruikershandleiding - Pagina 3
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Blueshape BV140HD. Blueshape BV140HD 20 pagina's. Professional cinema v-lock camera batteries
10. Do not use an apparently damaged or deformed battery pack. Otherwise, electrolyte
leakage, overheating, smoke emission, bursting and/or ignition of the battery pack may
occur.
11. Do not directly solder the battery pack. Otherwise, heat may melt down its insulation,
damage its gas release vents or other safety features possibly leading to leakage,
overheating, smoke emission, bursting and/or ignition.
12. Do not reverse the positive (+) and negative (-) terminals. Otherwise, during recharging,
the battery pack will be reverse-charged, abnormal chemical reactions may occur, or
excessively high current may flow during discharging possibly leading to chemical
leakage, overheating, smoke emission, bursting and/or ignition.
13. The positive (+) and negative (-) terminals are arranged in a particular orientation. Do not
force the connection if you may not easily connect the battery pack terminals to the
battery pack charger or other equipment. Confirm that the terminals are correctly
oriented. Reversing the terminals will result in reverse charging, possibly leading to
electrolyte leakage, overheating, smoke emission, bursting and/or ignition of the battery
pack.
14. Do not use the battery pack for other purposes other than those specified. Otherwise, its
guaranteed performance will be lost and/or its service life will be shortened. Depending on
the equipment in which the battery pack is used, excessively high current may flow
through battery pack, possibly damaging it and leading to electrolyte leakage, overheating,
smoke emission, bursting and/or ignition.
15. If the battery pack leaks, and the electrolyte reaches the eyes, do not rub them. Instead,
rinse the eyes with clean running water and immediately seek medical attention. Failure to
do this may result in eye injury.
Warning
1.
If recharging operation fails to complete even when a specified recharging time has
elapsed, immediately stop further recharging. Otherwise, electrolyte leakage, overheating,
smoke emission, bursting and/or ignition may occur.
2.
Do not put the battery pack into a microwave oven or a pressurised container. Rapid
heating or punctured sealing may lead to electrolyte leakage, overheating, smoke
emission, bursting and/or ignition.
3.
If the battery pack leaks or gives off a bad odour, remove it from any exposed flame.
Otherwise, the leaking electrolyte may catch fire, and the battery pack may emit smoke,
burst or ignite.
4.
If the battery pack gives off an odour, generates heat, becomes discoloured or deformed,
or in any way appears abnormal during use, recharging or storage, immediately remove it
from the equipment or battery pack charger and stop using it. Otherwise, the problematic
battery pack may develop electrolyte leakage, overheating, smoke emission, bursting
and/or ignition.
- 3 -