Blueshape GRANITE MINI Series Gebruikershandleiding - Pagina 11
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Blueshape GRANITE MINI Series. Blueshape GRANITE MINI Series 20 pagina's. Professional cinema 3-stud camera batteries
Pagina afdrukkenBattery Wi-Fi transmission
All GRANITE MINI batteries have an embedded Wi-Fi module that is the
core of the GRANITE Link architecture. This module is normally off by
default.
To switch it on, press the LED button for at least 5 sec until the topmost
RGB LED lights up and starts a blinking sequence till the module is on,
after which the LED blinks every ~2sec.
How to switch it on
press and hold the LED button for at least 5 sec, until the topmost
RGB LED lights up and starts a blinking sequence till the module is
on, after which the LED blinks every ~2 sec.
exception: if the battery voltage is below 10500mV while booting up,
the LED blinks green-red for 5 seconds and then turns off indicating
that the system cannot operate due to the low voltage. Wait for the
battery to rise above this threshold before powering the module
again.
How to switch it off
different methods are available:
press and hold the LED push button for at least 5 sec, when a red
LED lights up and initiates a blinking sequence lasting about 5 sec,
after which the system is off.
If the battery is not connected to the GRANITE Link App for more
than the hours indicated by the Off-Timer set in the battery by the
user through the App (default: 8hours), it switches off automatically
without user intervention to conserve power.
If the battery voltage drops below 10000mV for a time longer than 5
minutes, it switches off automatically without user intervention to
conserve power.
Please note that the status of the Wi-Fi embedded module does not alter
the operation of the battery pack: it may be turned on or off as desired
without any consequence to the battery performance.
Once the system is on, GRANITE MINI batteries operate in two modes
concurrently, Access-Point and Client.
- 11 -