d&b audiotechnik Yi-SUB Handmatig - Pagina 8

Blader online of download pdf Handmatig voor {categorie_naam} d&b audiotechnik Yi-SUB. d&b audiotechnik Yi-SUB 11 pagina's.

Note: When the D12 is operated in "Mix TOP/SUB mode",

the SenseDrive function is only available at the output B

connector.

In permanent installations, SenseDrive can also be applied to

cabinets with NL4 connectors or the fixed cable option (PG). The

connection of the negative signal wire (EP5 pin 4 of the respective

D12 output) to the SenseDrive wire (EP5 pin 5 of respective D12

output) is made in a breakout box close to the loudspeaker

cabinet. For an uncompromising SenseDrive performance the

connection should be done not more than 3 m (10 ft) away from

the loudspeaker.

2.3 Operation

NOTICE!

Only operate d&b loudspeakers with a correctly configured d&b

amplifier, otherwise there is a risk of damaging the loudspeaker

components.

Applicable d&b amplifiers:

D80/D20/D12/D6/10D/30D.

Application

Setup

Yi-SUB

Y-SUB

Within applicable amplifiers, the controller setup is available in

Dual Channel or Mix TOP/SUB mode.

For acoustic adjustment the 100 Hz mode can be selected.

100 Hz mode

With the 100 Hz mode selected, the upper operating frequency of

the system is reduced from 140 Hz to 110 Hz.

Cabinets per

channel

d&b Yi-SUB Manual 1.3 en