BlueSky Mast AL350G Series Snelle referentieblad - Pagina 5

Blader online of download pdf Snelle referentieblad voor {categorie_naam} BlueSky Mast AL350G Series. BlueSky Mast AL350G Series 6 pagina's. Primary guying deployment

Pagina afdrukken

Remove the stakes from the Lift

Base Plate by using the stake

remover.

Raise the lift base plate until it

nests firmly into the next mast

pole.

Repeat this process until the

red primary guy ring is within

reach.

Remove both stakes from the

tripod tilt leg and the left stakes

from the other tripod legs.

Do Not Duplicate, Alter, or Copy without the Express Written Consent

Quick Reference Sheet - Primary Guying

LOWERING / RECOVERY

Unlock the ALL guy ropes and

slide the guy handles toward

the guy stakes 12 inches.

Release the cam lock and

SLOWLY lower the mast to the

ground. Remove the mast pole.

Remove the 4 primary guy

ropes and unpin the primary

guy ring.

Loosen the turn knob on the tilt

leg and kneel the tripod.

[email protected]

AL350G Lift Series

Release the cam lock.

Raise the lift base plate until it

nests firmly into the next mast

pole.

Pull the slack in from all primary

guy ropes, wind them up and

stow them.

Remove all equipment from the

mounting pole.

Read Manual Before Use

Refer to detailed instructions in the

AL350G Lift Series Manual at all times

Raise the mast up enough to

remove the 1st mast pole .

Adjust all 4 PRIMARY Guy Ropes so the mast is straight and perpen-

dicular. You should only have to adjust the primary guy ropes for the

first 2 - 3 center mast poles, unless you are experiencing high winds.

Remove the tripod leg struts

from the strut base plate and

secure the struts to the legs.

Remove red primary guy ring

and stow it with the guy ropes.

Lock the cam lock and lower

the lift base plate and remove

the 1st mast pole.

Remove the red tipped strut

base plate stake and stow the

strut base plate.

Release the ball stop from the

holder and wind up the cable on

the winch.