Bluesound BSW150 Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Bluesound BSW150. Bluesound BSW150 13 pagina's. Network powered subwoofer

Pagina afdrukken

FCC STATEMENT

This equipment has been tested and found to comply with the limits for Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio TV technician for help.

CAUTION

• Changes or modifications to this equipment not expressly approved by

Bluesound Professional for compliance could void the user's authority to

operate this equipment.

• This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. this device may not cause harmful interference, and

2. this device must accept any interference received, including interference

that may cause undesired operation.

• This device contains licence-exempt transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic Development Canada's licence-exempt

RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference that may

cause undesired operation of the device.

• Under Industry Canada regulations, this radio transmitter may only operate

using an antenna of a type and maximum (or lesser) gain approved for the

transmitter by Industry Canada. To reduce potential radio interference to other

users, the antenna type and its gain should be so chosen that the equivalent

isotropically radiated power (e.i.r.p.) is not more than that necessary for

successful communication. This device may not cause interference.

1. The device for operation in the band 5150-5250 MHz is only for indoor

use to reduce the potential for harmful interference to co-channel mobile

satellite systems;

• To prevent electric shock, match wide blade of plug to wide slot, fully insert.

• Marking and rating plate can be found at the rear panel of the apparatus.

• To reduce the risk of fire or electric shock, do not expose this apparatus to rain

or moisture. The apparatus shall not be exposed to dripping or splashing and

that no objects filled with liquids, such as vases, shall be placed on apparatus.

• Mains plug is used as disconnect device and it should remain readily operable

during intended use. In order to disconnect the apparatus from the mains

completely, the mains plug should be disconnected from the mains socket

outlet completely.

• Battery shall not be exposed to excessive heat such as sunshine, fire or the

like.

• Danger of explosion if battery is incorrectly replaced. Replace only with the

same or equivalent type.

• An appliance with a protective earth terminal should be connected to a mains

outlet with a protective earth connection.

• Operating temperature: 0~35 degrees

RESPONSIBLE PARTY

Lenbrook International

633 Granite Court, Pickering, ON L1W 3K1 Canada Tel: 1 905 8316555

MPE REMINDER

To satisfy FCC/IC RF exposure requirements, a separation distance of 20 cm

or more should be maintained between the antenna of this device and persons

during device operation. To ensure compliance, operations at closer than this

distance is not recommended.

IF IN DOUBT CONSULT A COMPETENT ELECTRICIAN.

IMPORTANT SAFETY INSTRUCTIONS

This product is manufactured to comply with the radio interference

requirements of EEC DIRECTIVE 2004/108/EC.

NOTES ON ENVIRONMENTAL PROTECTION

At the end of its useful life, this product must not be disposed of with

regular household waste but must be returned to a collection point

for the recycling of electrical and electronic equipment. The symbol

on the product, user's manual and packaging point this out.

The materials can be reused in accordance with their markings.

Through re-use, recycling of raw materials, or other forms of recycling of old

products, you are making an important contribution to the protection of our

environment.

Your local administrative office can advise you of the responsible waste disposal

point.

INFORMATION ABOUT COLLECTION AND DISPOSAL OF WASTE BATTERIES

(DIRECTIVE 2006/66/EC OF THE EUROPEAN PARLIAMENT AND THE

COUNCIL OF EUROPEAN UNION) (FOR EUROPEAN CUSTOMERS ONLY)

Batteries bearing any of these symbols indicate

that they should be treated as "separate collection"

and not as municipal waste. It is encouraged that

necessary measures are implemented to maximize

the separate collection of waste batteries and

to minimize the disposal of batteries as mixed

municipal waste.

End-users are exhorted not to dispose waste

batteries as unsorted municipal waste. In order to

achieve a high level of recycling waste batteries,

discard waste batteries separately and properly

through an accessible collection point in your

vicinity. For more information about collection and recycling of waste batteries,

please contact your local municipality, your waste disposal service or the point of

sale where you purchased the items.

By ensuring compliance and conformance to proper disposal of waste batteries,

potential hazardous effects on human health is prevented and the negative

impact of batteries and waste batteries on the environment is minimized, thus

contributing to the protection, preservation and quality improvement of the

environment.