Ambient Technologies RCMHL Handleiding voor installatie en gebruik - Pagina 2
Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} Ambient Technologies RCMHL. Ambient Technologies RCMHL 7 pagina's. Hi/lo remote control
Pagina afdrukken•
Read this manual thoroughly prior to installing, programming or operating this remote control.
•
This remote control system is designed for use with a 6 VDC servo motor or solenoid gas valve system
(Maxitrol Gas Valve).
•
This remote control system requires three (3) "AAA" and four (4) "AA" alkaline batteries to power the
transmitter and receiver. Wiring must conform to appliance requirements and building codes/ordinances as
required by local and national code authorities having jurisdiction.
•
Do not short (or jumper) across the gas valve terminals to test the remote control installation. This could
damage the unit and void the warranty.
•
This remote control system should only be used as described in this manual. Any other use is not
recommended and will void the warranty.
Due to the sensitive temperature monitoring components in the transmitter, it is necessary to
allow the transmitter to stabilize to room temperature before accurate room temperatures are
displayed. If the transmitter is activated from a severe cold condition, allow 15 minutes for
accurate temperature readings to appear on the LCD.
f i r e - p a r t s . c o m
Turn appliance OFF and allow to cool before installing or servicing. DO NOT connect
110-120 VAC wiring to the gas control valve. The remote operator must be installed exactly
as outlined in these instructions. Read all instructions completely before attempting
installation. Follow instructions carefully during installation. Any modification of
components will void the warranty and may cause a fire hazard.
50D0033 Rev 1 June 2002
WARNING
Important Safety Information
Page 2 of 7
Ambient Technologies
A Division Of
Monessen Hearth Systems