Ambient Technologies RCSTEBA Handleiding voor installatie en gebruik - Pagina 3
Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} Ambient Technologies RCSTEBA. Ambient Technologies RCSTEBA 11 pagina's. Thermostatic on/off and blower remote control– 120vac
Pagina afdrukkenConnect the wiring terminal two (2) ¼" female spade terminals to the appliance valve. Refer to the appropriate
Homeowner's Manual for proper wiring connections to the appliance. Your appliance may have other options to
connect wiring from receiver. For applications longer than 22 inches, use 18 gauge wire, 105ºC rated, with no
splices. Connect to the two (2) 1/4" female spade wiring terminals and wire can be no longer than 20 feet.
Speed control module and thermal sensor must be removed before installing receiver and
applying the AC power. Failure to do so may cause the part damage and void the warranty.
Without removing the control module and thermal sensor, they and RCSTEBA both will try
to operate the blower at the same and may cause unexpected blower operation or damage.
Before connecting the blower with the receiver, always DISCONNECT SPEED CONTROL MODULE AND
THERMAL SENSOR from your fireplace if they exist as displayed in following diagram:
The blower has to be grounded to the body of the fireplace.
50D0112
RCSTEBA Installation & Operating Manual
Rel 1.0 April 2009
Page 3 of 10
Ambient Technologies
A Division Of
Monessen Hearth Systems