Ambient Weather WS-1171 Gebruikershandleiding - Pagina 14
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Ambient Weather WS-1171. Ambient Weather WS-1171 17 pagina's. Advanced weather station
Pagina afdrukken
Minimum 24 months for thermometer-hygrometer sensor (
weather climates)
7. Troublesho
If your question is not answered here, you can co
1. Email Support:
2. Live Chat Support:
3. Technical Support: 480-283-1644 (M-F 8am to
Pr
oble
m
Wireless remote (thermo-hygrometer) not
reporting i
n to console.
There are dashes on the display c
Temperature sensor reads too high in the
day time.
Indoor and Outdoor Temperature do not
agree
Indoor and Outdoor Humidity do not
agree
Version 1.8
©Copyright 2011, Ambient LLC. All Rights Reserved.
oting Guide
ntact us as follows:
www.ambientweather.com/chat.html
Solution
The maximum line of sight communication range is
300'. Mov
console.
onsole.
If the sen
th
e sensor assembly away from the display console.
Cycle power on the console. The console may have
e
xited the search mode.
Install a fresh set of batte
ermo-hygrometer. For cold weather environments,
th
install lithium batteries.
Make sure the remote sen
th
rough solid metal (acts as an RF shield), or earth
barrier (down a hill).
Move the display cons
g
enerating devices, such as computers, TVs and other
wireless transmitters or receivers.
Move the remote sensor to a highe
re
mote sensor to a closer location.
Radio Frequency (RF) Sensors cann
m
etal barriers (example, aluminum siding) or multiple,
thick walls.
Make sure the thermo-hygrometer is mounted in a
shaded area on t
following radiation shield if this is not possible:
http://www.ambientweather.com/amwesrpatean.htm
Allow up to one hour for the sensors to stabilize due to
s
ignal filtering. The indoor and outdoor temperature
sensors should agree within 4 °F (the sensor accuracy is
± 2 °F).
Allow up to one hour for the sensors to stabilize due to
signal filter
should agree within 10 % (the sensor accuracy is ± 5 %).
use lithium batteries in cold
(M-F 8am to 4pm Arizona Time)
4pm Arizona Time)
e the sensor assembly closer to the display
sor assembly is too close (less than 10'), move
ries in the remote
sors are not transmitting
ole around electrical noise
he north facing wall. Consider the
ing. The indoor and outdoor humidity sensors
r location. Move the
ot transmit through
l
Page 14