Ambient Weather WS-0416 Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Ambient Weather WS-0416. Ambient Weather WS-0416 16 pagina's. Wireless indoor/outdoor 8-channel thermo-hygrometer

Ambient Weather WS-0416 Gebruikershandleiding
1. Temperature
2. Temperature units (°F or °C)
3. Temperature, Rate of Change indicator
4. Temperature Calibrated Icon (when the
calibration is displayed )
5. Emission Icon (flashes when updating)
6. Humidity, Rate of Change indicator
7. Min/Max Clears daily mode
8. Low power indicator

2.4.2 Sensor Operation Verification

Verify the indoor and outdoor humidity match closely with the console and sensor array in the same
location (about 5 to 10' apart). The sensors should be within 10% (the accuracy is ± 5%). Allow
about 30 minutes for both sensors to stabilize. The humidity can be adjusted or calibrated later to
match each other a known source.
Verify the indoor and outdoor temperature match closely with the console and sensor array in the same
location (about 5 to 10' apart). The sensors should be within 2°F (the accuracy is ± 1°F). Allow
about 30 minutes for both sensors to stabilize. The temperature can be adjusted or calibrated later to
match each other a known source.
Version 1.0
©Copyright 2017, Ambient LLC. All Rights Reserved.
Figure 5
9. Humidity Calibrated Icon (when the calibration is
displayed )
10. Humidity Comfort Colorful Icon
11. Relative Humidity (%)
12. Channel 1,2,3,4,5,6,7,8 indictor
13. Scroll Icon
14. Min/Max Record mode
15. Indoor Icon
Page 6