Asko HI1632 Gebruiksaanwijzing - Pagina 14

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Asko HI1632. Asko HI1632 18 pagina's. Induction hob

Pagina afdrukken

1. Description of Your Appliance

For the fitter

Electrical connection

These hobs must be connected to the

mains using a socket in compliance with

publication IEC 60083 or an all-pole circuit-

breaker device in compliance with the

installation rules in force.

When power is first supplied to your hob,

or after an extended power cut, an

indicator light will appear on the control

panel. Wait for 30 seconds approximately

until this information disappears before

using your hob (This display is normal and

it is intended, if applicable, for your after-

sales service. In all cases, the user of the

hob should disregard it).

Hook-up of 220-240V~

Black-grey

Blue

Brown

32A

Blue

Brown

16A for model 803HI16322

32A for model 803HI18322

Green/yellow

N L

Hook-up of 400V 2N~ - 16A

Separate the 2 phase wires (L1 and L2)

before connection.

Black-grey

Brown

Blue

L1 L2

Neutral

Live

For a 400 V 2N triphase connection, if your

hob malfunctions, check that the neutral

conductor is properly connected.

Warning

If the power cable is damaged, it

should be replaced by the

manufacturer, its after-sales service

department or by a qualified person to

avoid danger.

Warning

The safety wire (green-yellow) is

connected to the appliance's terminal

and must be connected to the

ground lead of the electrical set-up.

In the case of connection to an electric

wall socket, it must remain accessible

after installation.

The fuse in your set-up must be

10 amperes.

If the power cable is damaged, it must

be replaced by the manufacturer, its

After-Sales Service Department or a

similarly qualified person to avoid

danger.

Green/yellow

Earth