Ambient Weather WS-14 Gebruikershandleiding - Pagina 10
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Ambient Weather WS-14. Ambient Weather WS-14 17 pagina's. Wireless 8-channel floating pool and spa thermometer with daily min/max display
Pagina afdrukken
will automatically toggle between sensors until all sensors have reported in.
Do not touch any buttons until the remote sensor has reported in, or the radio search icon
is no longer constantly on, otherwise the remote sensor search mode will be terminated.
When the remote sensor temperature has been received, the console will automatically
switch to the normal mode, and all further settings can be performed.
If the remote does not update, please reference the troubleshooting guide in Section 8.
4.1 Display Console Layout
4.2 Sensor Operation Verification
Verify the indoor and floating pool temperature match closely in the same location (about 5 to 10'
apart). The sensors should be within 2°F (the accuracy is ± 1°F). Allow about 30 minutes for both
sensors to stabilize. The temperature can be adjusted or calibrated later to match each other or a
known source.
5 Display Features
5.1 Rate of Change Icon
The rate of change icon
upward, the temperature is increasing at a rate of +2°F per 30 minutes (or greater), If the arrow points
downward, the temperature is decreasing at a rate of -2°F per 30 minutes (or less).
Version 1.1
©Copyright 2014, Ambient LLC. All Rights Reserved.
Figure 11
detects rapid changes in remote temperature. If the arrow points
Page 10