Ambient Weather WS-25 Gebruikershandleiding - Pagina 17
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Ambient Weather WS-25. Ambient Weather WS-25 19 pagina's. Wireless 8-channel floating pool and spa thermometer with indoor temperature and humidity
Pagina afdrukken
Problem
console.
Temperature sensor reads too high in the
day time.
Indoor and Outdoor Temperature do not
agree
Display console contrast is weak
7 Accessories
The following software and hardware accessories are available for this weather station at
www.AmbientWeather.com
Accessory
Ambient Weather F007TH
Wireless Thermometer for
Ambient Weather Stations
Version 1.2
©Copyright 2019, Ambient LLC. All Rights Reserved.
Solution
displayed. Once the signal is reacquired, the remote
search icon
will be displayed.
The maximum line of sight communication range is 300'
and 100' under most conditions. Move the sensor
assembly closer to the display console.
If the sensor assembly is too close (less than 5'), move
the sensor assembly away from the display console.
Make sure the remote sensor LCD display is working
and the transmitter light is flashing once per 60 seconds.
Install a fresh set of batteries in the remote thermometer.
For cold weather environments, install lithium batteries.
Make sure the remote sensors are not transmitting
through solid metal (acts as an RF shield), or earth
barrier (down a hill).
Move the display console around electrical noise
generating devices, such as computers, TVs and other
wireless transmitters or receivers.
Move the remote sensor to a higher location. Move the
remote sensor to a closer location.
Make sure the thermometer is mounted in a shaded area
on the north facing wall. Consider the following
radiation shield if this is not possible:
http://www.ambientweather.com/amwesrpatean.html
Allow up to one hour for the sensors to stabilize due to
signal filtering. The indoor and outdoor temperature
sensors should agree within 2 °F (the sensor accuracy is
± 1 °F).
Use the calibration feature to match the indoor and
outdoor temperature to a known source.
Replace console batteries with a fresh set of batteries.
.
Add additional remote thermometer-hygrometers. Supports up to eight
remote sensors.
will turn off, and the current values
Description
Page 17