Ambifuego KALIDO 73 Installatie-, gebruikers- en onderhoudsinstructies - Pagina 13

Blader online of download pdf Installatie-, gebruikers- en onderhoudsinstructies voor {categorie_naam} Ambifuego KALIDO 73. Ambifuego KALIDO 73 15 pagina's. Convector gas fire

Pagina afdrukken
Remote control with climate control system (depending the gas fire model)

Display setting

After having changed the batteries, press the symbols (OFF) and (▼) and select ºF/12
hours or ºC/24 hours.

Hour setting

For the selection of the hour you have to press (▼) and (▲). Once the screen light you
can proceed to the hour (▲ ) and (▼ ) minutes setting.

Setting of the temperature

Press SET and select ☼ or C (Temperature day or night). Once choose the option press
SET till it flickers. Then adjust the temperature pressing (▲) or (▼). (Fig.1).

Setting the timer

Press SET alternatively till the option TIMER appears. Keep pressing SET till it flickers.
The program 1 (P1), ☼ set the lighting and C switch it off . In both options you an
adjust the time by pressing (▼) or (▲). For the second program (P2) proceed the same
way. (Fig.2)
Please note it is advised to replace the batteries yearly ,on the remote and receiver,
whilst servicing the appliance.
Cleaning the fire
Ensure that the appliance is cool. Regular dusting with a dry cloth is usually all that is
necessary to keep your fire looking at it's best. From time to time it may be necessary to
clean the steel surface with a slightly damp cloth - do this while the fire is cool and
ensure that no water remains on the appliance surface.
Glass.
Let the fire and glass cool completely. Only the outside of the glass can be cleaned by
the user. Wash the glass with warm water, using a soft paper towel or cloth, rinse and
dry thoroughly. Never use abrasive or harsh chemicals to clean the glass.
For stubborn deposits use a cleaner available from your dealer. Do not allow the cleaner
to touch any brass ornamentation.
1
Ensure that the fire is cold before undertaking any cleaning. Remember that heat is
retained for some time after the fire is switched off. In normal use your fire requires only
minimal cleaning. Some soot may form on any ceramic pieces placed in the flames but
this is generally harmless unless an excessive amount is deposited.
2
If large pieces of debris are found in the fire, sufficient to alter the appearance or
operation of the appliance, the chimney / flue should be inspected and the appliance
serviced before further use.
3
In any event, the chimney should be checked annually to ensure continued clearance of
the combustion products and that there is no excessive build-up of soot.
Fig. 1
Fig.2
13
Fig.3