ambiq micro Apollo2 Blue Snelstarthandleiding - Pagina 7
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} ambiq micro Apollo2 Blue. ambiq micro Apollo2 Blue 12 pagina's. Evb
Ook voor ambiq micro Apollo2 Blue: Snelstarthandleiding (16 pagina's)
Pagina afdrukken
Quick Start Guide for
Apollo2 EVB (Rev 1.0)
Revision 1.0, June 2017
4.
Debug Interface
Figure 2 shows the Apollo2 EVB set up for standard debug using the on-board J-Link debugger and on-board
3.3V power supply.
Figure 2. Apollo2 EVB using On-board J-Link Debugger
NOTE: Due to an I/O voltage contention issue with the J-Link processor, the EVB only supports 3.3V operation.
The debug interface is supported by standard J-Link drivers from Segger. Please refer to section 5 "Software
Development Tools for the Apollo2 EVB" for more details on J-Link debug support.
This EVB also supports the use of an external Cortex SWD debug interface through a standard 10-pin debug
header (DEBUG IN - J2) as shown in Figure 3.
QS-A2-1p00
Page 6 of 11
©2017 Ambiq Micro, Inc.
All rights reserved.