Ambir ImageScan Pro 800ix series Installatie- en installatiehandleiding - Pagina 10
Blader online of download pdf Installatie- en installatiehandleiding voor {categorie_naam} Ambir ImageScan Pro 800ix series. Ambir ImageScan Pro 800ix series 15 pagina's. High-speed adf scanner installation and setup guide for mac
Ook voor Ambir ImageScan Pro 800ix series: Installatie- en installatiehandleiding (14 pagina's)
Pagina afdrukken
3. Close the ADF cover by pushing it back down until it snaps into place.
Replace the Pad Module
The approximate use of the pad module is 20,000 scans. A replacement pad module is provided and
should be saved. Additional pads are available for purchase at
Replace Roller
The approximate use of the roller is 100,000 scans. To replace the roller, do the following:
PLEASE NOTE: Replacement rollers are available for purchase at
http://www.ambir.com/800ix-series-set
1. Open the ADF cover by pulling the cover open lever.
2. Remove the pad module by pinching both sides of the
pad module and pull it out.
3. Install the new pad module by inserting the tabs on the
module onto their slots on the scanner.
4. Close the ADF cover by pushing it back down until it
snaps back into place.
http://www.ambir.com/800ix-series-set
1. Open the ADF cover by pulling the cover open lever.
2. Open the roller cover by pinching both sides of the roller cover.
3. Remove the feed roller and pull it out.
4. Install the new feed roller by aligning and inserting the
feed roller onto the roller pitman on the scanner.
5. Close the ADF cover by pushing it back down until it
snaps back into place.
9