Ambir ImageScan Pro 940u Snelstarthandleiding - Pagina 12
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Ambir ImageScan Pro 940u. Ambir ImageScan Pro 940u 14 pagina's. High speed document scanner with ultrasonic misfeed detection
Ook voor Ambir ImageScan Pro 940u: Gebruikershandleiding (13 pagina's)
Pagina afdrukken
Ambir ImageScan Pro
Scanner Connection
The fi rst step to take when
troubleshooting connection
problems with your scanner is
to check all physical connections.
The icon ,
the Windows system tray,
indicates if the scanner software
is properly launched and the
scanner and computer are
communicating with each other.
LED Indication
Warning
Power / Power
LED Light
Saving LED Light
Off
White
Off
Orange
Red
Blinking White
Blinking
White
Red
Blinking
Off
Red
Off
Off
Ultrasonic Sensor
When scanning a stack of documents by ADF, the ultrasonic
sensor detects multifeeds by checking paper overlap (i.e.,
2 or more pages stuck together when being fed through the
ADF). Clean the ultrasonic sensor lightly with a dry cloth if it is
necessary.
>
This function may or may not be available
depending on the scanner model you
purchase.
12
TM
located on
The scanner is turned on, ready to
scan images.
The scanner is in standby mode (sleep
mode) if it is idle for 10 minutes.
The ADF cover is opened.
Paper jam.
An internal component of the scanner
may have malfunctioned.
The scanner is off, either because the
power is not turned on, or because the
AC adapter is not properly plugged
into an AC power outlet.
930u
Appearance
The program has been successfully launched and
the scanner is connected with the computer, ready to
scan images.
The scanner is not connected with the computer, or the
scanner power is not switched on.
You have chosen to terminate the program. The scanner
No Display
may or may not be connected to the computer.
Status
Quick Start Guide
Status
The Power/Power
Saving LED and Warning
LED indicate different