Ambirad Apollo QHL 45-3 Gebruiksaanwijzing - Pagina 17

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Ambirad Apollo QHL 45-3. Ambirad Apollo QHL 45-3 20 pagina's. Quartz glow instant infra-red heaters

Ambirad Apollo QHL 45-3 Gebruiksaanwijzing
11. The lamp should now be removed from the
heater as shown below.
12. Refit the new lamp in reverse order
ensuring that no wires get trapped and all
screws are fully tightened.
4.4 Titan range:
1. Disconnect from the power supply and
remove the heater from wall fixings before
attempting to replace any lamp.
2. Remove the guard by flexing one end.
3.
Remove
the
extrusion(s) and fascia panels (fitted between
lamps on large models) adjacent to the failed
lamp (see below).
4. Remove the panels to expose the lamp
connections (see below).
screws
from
the
5. Disconnect lamp leads from terminal plates,
and remove lamp retaining clips (see diagram
below).
6. Slide the lamp out through the extrusion.
7. Fit a new lamp, taking care not to mark the
reflector or handle the lamp (see caution note).
8. Replace lamp retaining clips and connect the
new lamp leads to the terminal plates, ensuring
end
live/neutral leads are also reconnected.
9. Replace the end extrusion(s) and fascia
panels securely, using the fixings previously
removed and refit the guard.
Caution. Do not handle lamp with bare hands.
Remove finger marks with a soft cloth and
methylated spirit or alcohol. Finger marks will
burn into quartz causing premature lamp failure.
Please note: Apollo outer casing can reach
high temperatures.