Asko D1996SS Handleiding voor planning en ontwerp - Pagina 9
Blader online of download pdf Handleiding voor planning en ontwerp voor {categorie_naam} Asko D1996SS. Asko D1996SS 15 pagina's. Standard dishwashers
Ook voor Asko D1996SS: Gebruiks- en onderhoudshandleiding (12 pagina's), Installatie en aanpassing (4 pagina's), Handleiding voor planning en ontwerp (19 pagina's), Gebruiks- en onderhoudshandleiding (12 pagina's)
D1796FI AND D1996FI CUSTOM PANEL INSTALLATION OPTIONS
4-INCH TOE KICK INSTALLATIONS
Custom panels the same height as the
dishwasher door
If the custom panel is the same height as the dishwasher door, a 2"
decorative fill strip or pull-out cutting board must be used to fill the
area between the panel and the counter top (as illustrated below).
2" decorative fill strip or cutting board
597 mm
4-inch toe kick
Custom panels that extend to cabinet top
Another installation option for a 4" toe kick is to extend the
custom panel to the cabinet top (as illustrated below), which
eliminates the need for a decorative fill strip. A one-piece custom
door panel with a curved handle is available for 4-inch toe kick
installations (see page 12).
Panel extends from toe kick to cabinet top.
23-1/2"
597 mm
4-inch toe kick
NOTE: If the cutout is 24" wide, the custom panel can be
23-3/4" wide.
Specifications are subject to change without notice. See installation instructions for additional details.
23-1/2"
ASKO D
With a 4-inch toe kick installation, the
door panel extends 2 inches above the
control panel, as illustrated.
If you install the door panel to reach the cabinet top, we
recommend that you install a 2" support strip between the upper
edge of the dishwasher and the counter to hide the top of the
dishwasher and further reduce water noise. A metal fill strip is
also available for this type of installation (see page 12).
2-inch support strip
4-inch toe kick
6-INCH TOE KICK INSTALLATIONS
For 6" toe kick installations, no decorative fill strips or support
strips are necessary.
Panel extends from toe kick to cabinet top.
ISHWASHER
1-3/4"
(44 mm)
9