ACR Electronics FPR-20 PROGRAMMER Podręcznik wsparcia produktu - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik wsparcia produktu dla Akcesoria ACR Electronics FPR-20 PROGRAMMER. ACR Electronics FPR-20 PROGRAMMER 15 stron. Field programmer reader

Drukuj stronę

3) Type or browse to the correct drive. For example if a CD is used, select browse,

select your CD-ROM drive, select the file setup.exe and press ENTER and

follow the installation instructions.

a. Alternatively, use the file manager or Windows Explorer to find the

4) Follow the installation directions on the screen. The FPR-20 must be installed in

the "C:\Fpr20\" directory. This directory is already set when you run the setup

program.

5) A panel will appear following installation containing the FPR20 shortcut icon.

Drag the icon to the desktop

4.3

Adding a Printer

If you do not have a printer already connected, you may need to install one to your

computer.

For more information regarding adding a printer, please consult your

Window's operating Manual or visit Microsoft online at

Adding Printer.

SECTION 5- USING THE FPR-20

5.1

Opening the FPR-20 Program

Double click the FPR20 shortcut icon on the desktop.

Appearance of the full screen displayed in the window is dependent on the resolution

settings of the PC. The resolution can be adjusted through the display option of the

Control Panel in your Windows™ operating system.

5.2

Programming the Message

The FPR-20 can program the AquaFix, TerraFix, and AeroFix 406 PLB-200/201.

Programming is accomplished by generating the message in the computer with

information based on the unit and protocol selected. Data is then sent to the FPR-20

interface unit/programming head and the programming head handles all further

communications with the beacons via infrared light.

To program a PLB-200/201, connect the 6 Conductor Cable with RJ11 phone plug

between the PC COM adapter jack and the programming head, (See Figure 5). Perform

the following steps: (These are also provided by clicking the Help button.)

1. In the Program Setup Menu (See figure 2), choose the Product Name Menu and

select the product you wish to program, e.g. AquaFix 406 PLB-200.

2. Choose the Product Number Menu, Select the product number you want to

program, e.g. 2797.3 or 2797.4 for the Aquafix 406. (you can find this information on

the product label located on the back of the beacon)

setup.exe file on the CD, Double click on setup.exe, and follow the

installation instructions.

www.Microsoft.com

keyword

Y1-03-0181 Rev. A