Ambirad ARE35/50' SL Instrukcja instalacji i serwisowania - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja instalacji i serwisowania dla Grzałka gazowa Ambirad ARE35/50' SL. Ambirad ARE35/50' SL 20 stron. Gas fired radiant tube heaters
Drukuj stronę
- 1. Table of Contents
- 2. AR and ARE Series Gas Fired
- 3. Gas Connection
- 4. Standards
- 5. Assembly Instructions
- 6. Fitting Reflectors and End Caps
- 7. Burner/Fan/Damper Assembly
- 8. AR and ARE Series Double Linear
- 9. HB and DL Damper Settings
- 9. Installation – Suggested Methods
- 9. Of Heater Suspension
- 10. Flue Connection
- 11. Commissioning for Individually
- 12. Routine Service
- 13. Trouble Shooting Checklist
- 14. User Instructions for Ambi-Rad
Figure 7 Fitting reflector end caps
Fit reflector end caps using M5 bolts, washers and 'S' clips. (Not applicable to ARE range)
Note Do not stand on reflectors when removing plastic film.
Figure 8 Inclined mounting – unflued
Figure 9 Inclined mounting – flued
Screw
Fit relector end-caps before fitting burner
assembly and fan assembly.
9