Ambirad TORNADO Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Grzałka gazowa Ambirad TORNADO. Ambirad TORNADO 8 stron. Gas fired mobile heater
Również dla Ambirad TORNADO: Instrukcja instalacji i obsługi (16 strony)

Drukuj stronę

Fitting Instructions.

1: Flue duct kit (Fig.1).

100mm tubing

Fit flue duct spigot into tube and tighten hose

clip as shown in Fig.2.

Push spigot firmly into flue duct outlet on the

right hand side of the heater as shown in Fig.3.

IMPORTANT: Ensure the heater is switched off

and cooled sufficiently before removing flue

duct after use.

Fig.1

Spigot

Fig.2

Fig.3

2: Ducted air kit (Fig.4).

150mm tubing

Fit air inlet duct spigot into tube and tighten hose

clip as shown in Fig.5.

Push spigot firmly into the air inlet hole on the

left side of the heater as shown in Fig.6.

Fig.4

Spigot

Fig.5

Fig.6