Ambit DOCSIS Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Modem Ambit DOCSIS. Ambit DOCSIS 12 stron.

Headquarters: 5F-1, 5 Hsin-An Road, Hsinchu

Taipei Branch: 11F,100-1 Min-Chuan Road,

Science-Based Industria Park Taiwan, R.O.C.

Hsin-Tien, Taiwan, R.O.C.

TEL: +886 3 5784975

Installation

Read and Follow Instructions - You should read all the safety and operating instructions before operating the

modem. Follow all operating instructions.

Retain Instructions - You should save all the safety and operating instructions, for your future reference.

Heed Warnings - Comply with all warnings on the products and in the operating instructions.

Check Power Sources - Operate this product only from the type of power source indicated on the product's

marking label. If you are not sure of

power company.

Be Careful of Overloading - Do not overload wall outlets or extension cords, as this can result in a risk of fire or

electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked wire insulation,

and broken plugs are dangerous. They may result in a shock or fire hazard. Periodically examine the cord, and, if

its appearance indicates damage or deteriorated insulation, have it replaced by your service technician.

Protect Power Cords - Route power supply cords so that they are not likely to be walked on or pinched by items

placed upon or against them.

Pay particular attention to cords where they are attached to plugs and convenience receptacles, and examine the

point where they exit from the product.

Check Ventilation - Slots and openings in the enclosure are provided for ventilation to ensure reliable operation

of the product and to protect it from overheating. Do not block or cover these openings. Never block these

openings by placing the product on a bed, sofa, rug, or other similar surface. Never place this product near or over

a radiator or heat register, or any other heat source (including amplifiers). Do not place this product in a built-in

installation, such as a bookcase or equipment rack, unless you provide proper ventilation.

Do Not Use Accessories - Do not use attachments, unless they are recommended by Ambit, as they may cause

electrical or fire hazards.

Use the Recommended AC Adaptor - You must use the Adaptor that comes with your Ambit Cable Modem.

Do Not Use Near Water - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen

sink or laundry tub, in a wet basement or near a swimming pool, and the like.

Do Not Place Near High Temperature Source -for example near a steamer, Kitchen range fire, and the like.

Use Caution in Mounting This Product - Do not place this product on an unstable surface or support. The

product may fall, causing serious injury to a child or adult, as well as serious damage to the product.

Use Care in Moving Product-and-Cart Combinations - Quick stops, excessive, force and uneven surfaces may

cause the product-and-cart combination to overturn.

Ground the Cable System - Be sure that the outside cable system is grounded, so as to provide some protection

against voltage surges and built-up static charges.

Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984 (Section 54 of the Canadian Electrical Code,

Part 1) provides information with respect to proper

grounding of the cable system.

AMBIT Microsystems Corporation

TEL:+886-2-218 9800

the type of power supplied to your home, consult your dealer or local