Aero Profile DC Instrukcja instalacji i obsługi - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Wentylator Aero Profile DC. Aero Profile DC 16 stron.

Electricians make sure everything on this checklist is ticked off before you leave the installation site. If you have trouble

installing our product please refer to the trouble shooting section on page 11 first, then phone the AeroDC Warranty

Hotline on 1300 116 305 (open 9am to 5pm EST). DO NOT uninstall the fan unless asked to do so.

Ceiling fan is not installed using a solid-state wall controller. Wall controllers must only be types

approved for use by AeroDC.

The fan, fan light assembly and bracket are earthed.

Fan, fan light and remote control receiver are run from the same final circuit via an isolation switch.

Mounting bracket must be firmly secured to a solid structure such as a concrete ceiling, steel structure

or timber framing. If additional bracing is added it must be firmly secured to the rafters and not left

floating on the ceiling.

Counter sunk screws are not to be used to attach bracket to ceiling.

Fan blades are at least 2.1m (7 feet) above floor level.

Check the fan is operating correctly on all speeds.

If light is installed. Check light is functioning properly.

National Warranty Hotline|1300 116 305

ELECTRICIAN CHECKLIST

Monday to Friday 9am to 5pm AEST