ACR Electronics PathFinder3 SART-3 Podręcznik wsparcia produktu - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik wsparcia produktu dla Radio morskie ACR Electronics PathFinder3 SART-3. ACR Electronics PathFinder3 SART-3 20 stron. Search and rescue transponder

Drukuj stronę

1. Section 5 - Maintenance

CAUTION: Keep this SART at least 3 feet (1 meter) away from all

magnetic sources, stereo speakers and compass installations.

The SART mounting bracket should be bolted to a bulkhead using four (4)

suitable M6 (1/4") bolts. Mounting hardware for the bracket is not included.

Hardware required depends on the bulkhead material and its thickness.

Bracket mounting holes and SART mounting details are shown in figure 4.

To install the PathFinder™



Remove SART from its packaging and check for shipping damage.



Perform the SART test (see Maintenance section for the procedure).



Select a position for SART Mounting allowing sufficient space for the

assembly.



Drill holes to dimensions shown on Figure 4.



Place bracket in position and secure to bulkhead as follows:



Remove the SART from the bracket.



Position bracket at the correct position for maximum visibility



Mark position of bracket fixing holes.



Drill holes to suit mounting fixtures.



Secure bracket to bulkhead.



Mount SART on the bracket (see figure 4).



Secure SART with Velcro strap.

Y1-03-0170H

Installation